YRT100P4 转台轴承
YRT100P4 转台轴承
- 型号:YRT100P4
- d:100mm
- D:185mm
- H:38mm
- 重量:4.1KG
- 产地:洛阳
- 交期:现货
- 包装:木箱
- 价格:咨询
- 品牌:MONTON
YRT100P4 转台轴承
轴承代号bearing type | 外形尺寸boundary dimensions | 固定孔 fixing holes | ||||||||||||
d | D | H | H1 | C | D1 | J | J1 | 内圈inner ring | 外圈outer ring | |||||
单位unit: mm | d1 | d2 | a | 数量 quantity | d3 | 数量quantity | ||||||||
mm | mm | |||||||||||||
YRT100 | 100 | 185 | 38 | 25 | 12 | 160 | 112 | 170 | 5.6 | 10 | 5.4 | 16 | 5.6 | 15 |
固定螺钉数量Number of retaining screws | 螺纹拔取孔Extraction thread hole | 节距1)Number of pitches X angle of pitches | 螺钉拧紧力矩Screw tightening torque | 基本额定载荷Basic load rating | 极限转速Limiting speed | 轴承摩擦力矩3)Bearing frictional torque | 重量weight | 轴承 代号bearing type | ||||
轴向axial | 径向radial | |||||||||||
动dynamic load | 静static load | 动dynamic load | 静static load | |||||||||
MA2) | Ca | Coa | Cr | Cor | 脂grease | |||||||
G | 数量quantity | 数量×t quantity | Nm | KN | r/min | Nm | Kg | |||||
2 | M5 | 3 | 18×20° | 8.5 | 76.5 | 415 | 47.5 | 120 | 430 | 3 | 4.1 | YRT100 |
转台轴承配合轴的公差machining tolerances for shafts | |||||||
轴承代号type | 配合轴颈(mm)shaft diameter | 圆度(○)roundness | 垂直度(⊥)perpendicularity | 平行度(∥)parallelism | 表面粗糙度Ra roughness | ||
公称尺寸Nominal dimension | 上偏差upper | 下偏差lower | t1(µm) | t3(µm) | t4(µm) | Ra(µm) | |
YRT100 | 100 | 0 | -0.015 | 6 | 4 | 4 | 0.4 |
转台轴承配合座的公差machining tolerances for housings | |||||||
轴承代号type | 配合座孔(mm)housing diameter | 圆度(○)roundness | 垂直度(⊥)perpendicularity | 平行度(∥)parallelism | 表面粗糙度Ra roughness | ||
公称尺寸Nominal dimension | 上偏差upper | 下偏差lower | t1(µm) | t3(µm) | t4(µm) | Ra(µm) | |
YRT100 | 185 | +0.022 | -0.007 | 10 | 7 | 7 | 0.8 |
YRT转台轴承是一种外圈旋转,内圈支撑的回转机构,主要分为YRT型、YRTS型、YRTM型三大系列,此三系列轴承具有相同的安装尺寸,内部结构存在差异,性能相似。YRT系列轴承均有三列滚子构成(如右图),两列轴向滚子保证稳定的轴向承载能力,一列径向滚子保证轴承可承受径向力及倾覆力矩作用,适合轴向承载的回转机构。YRT转台轴承主要用于数控机床制造业,作为其核心零组件,国内YRT系列轴承需求还比较依赖进口,国产YRT转台轴承的精度参数标准也以国际制造商为准。进入二十一世纪以来,尤其是随着国家“高档数控机床与基础制造装备”专项的启动,极大地推动了机械装备工业的发展,“高速、精密、复合、智能化”的机床发展进程得到了进一步加速。