YRT260P4
轴承代号bearing type | 外形尺寸boundary dimensions | 固定孔 fixing holes | 固定螺钉数量Number of retaining screws | 螺纹拔取孔Extraction thread hole |
|
d | D | H | H1 | C | D1 | J | J1 | 内圈inner ring | 外圈outer ring |
单位unit: mm | d1 | d2 | a | 数量 quantity | d3 | 数量quantity |
mm | mm | G | 数量quantity |
YRT260 | 260 | 385 | 55 | 36.5 | 18 | 345 | 280 | 365 | 9.3 | 15 | 8.2 | 34 | 9.3 | 33 | 2 | M12 | 3 |
节距1)Number of pitches X angle of pitches | 螺钉拧紧力矩Screw tightening torque | 基本额定载荷Basic load rating | 极限转速Limiting speed | 轴承摩擦力矩3)Bearing frictional torque | 重量weight | 轴承 代号bearing type |
轴向axial | 径向radial |
动dynamic load | 静static load | 动dynamic load | 静static load |
MA2) | Ca | Coa | Cr | Cor | 脂grease |
数量×t quantity | Nm | KN | r/min | Nm | Kg |
36×10° | 34 | 160 | 1060 | 93 | 290 | 200 | 20 | 18.3 | YRT260 |
转台轴承配合轴的公差machining tolerances for shafts |
轴承代号type | 配合轴颈(mm)shaft diameter | 圆度(○)roundness | 垂直度(⊥)perpendicularity | 平行度(∥)parallelism | 表面粗糙度Ra roughness |
公称尺寸Nominal dimension | 上偏差upper | 下偏差lower | t1(µm) | t3(µm) | t4(µm) | Ra(µm) |
YRT260 | 260 | 0 | -0.023 | 12 | 8 | 8 | 0.8 |
转台轴承配合座的公差machining tolerances for housings |
轴承代号type | 配合座孔(mm)housing diameter | 圆度(○)roundness | 垂直度(⊥)perpendicularity | 平行度(∥)parallelism | 表面粗糙度Ra roughness |
公称尺寸Nominal dimension | 上偏差upper | 下偏差lower | t1(µm) | t3(µm) | t4(µm) | Ra(µm) |
YRT260 | 385 | +0.029 | -0.007 | 13 | 9 | 9 | 0.8 |
转台轴承 是一种能够同时承受同时承受轴向负荷、径向负荷和倾覆力矩等综合载荷的轴承,集支撑、旋转、传动、固定等功能于一身的特殊结构的精密轴承。转台轴承基本采用负游隙带预紧的设计方式,保证轴承较高的刚性及旋转精度;一般情况下,转台轴承自身内外圈带有安装孔、润滑油孔和密封结构,适用于精密工作条件下各类设备的不同安装使用需求;转台轴承具有结构紧凑、旋转精度高、安装和维护简便等特点,转台轴承主要包括YRT转台轴承、ZKLDF转台轴承以及交叉滚子轴承3大类。此三系列轴承具有相同的安装尺寸,内部结构存在差异,性能相似。